Charging power adjustable between 1.4 kW and 11 kW, depending on the number of phases of the car's on-board charger (charging current adjustable between 6A and 16A)
Product Specifications
Mobile Charging Station / Wallbox: IC-CPD, according to EN IEC 62752:2016/A1:2020
Dimensions: approx. 21.2 x 9.4 x 6.5 cm
Weight: approx. 4.3 kg (including packaging)
Connection: Single-phase or three-phase
Nominal Voltage: 230 - 240 V (single phase) / 400 - 415 V (three phase)
Nominal Frequency: 50 Hz
Standby consumption: 3.1 W (LEDs off)
Permitted Environmental Conditions
Installation Location: Indoor and outdoor use
Operating Temperature: -30°C to +50°C
Storage Temperature: -30°C to +65°C
Maximum Altitude: 2,000 m above sea level
Relative Humidity: Maximum 95% (non-condensing)
Impact Resistance: IK10
Safety
Integrated DC protection module with additional DC and AC detection (6mA DC, 30mA AC)
Anti-theft protection: Charging cable lock
Input voltage: Check phase and voltage
Switching functions: Check switching functions
Earthing check: For TT, TN networks (switchable earthing check for IT networks – Norway mode)
Current sensor: Three-phase monitoring
Temperature sensors: Regulates charging current in case of overheating
IP65 protection: Protection against dirt and water, suitable for continuous outdoor use
Choosing a selection results in a full page refresh.
